Showing posts with label dinghy. Show all posts
Showing posts with label dinghy. Show all posts

Has Anyone Seen This Dinghy

Saturday, March 19, 2016

LOST:
12 foot SKIFF constructed of fiberglass and foam core, grey hull, white interior, interior layout with large forward locker with hatch and two round view ports on the side bench/floatation lockers, mast step made of 3 inch PVC pipe, starboard offset dagger board trunk (it leaks at full speed) four cleats fore and aft. Under she has a full skeg for motoring.
Chris designed the Ultimate Dinghy, to row, sail and motor; all very well. And she was built to withstand us.
Up until the Saturday evening of the Bequia Island Easter Sailing Regatta this skiff was our family truckster. She was 12 feet of workhorse and safety for our family and we miss her greatly. We miss her because the evening of the prize giving at the Sailors Bar in Bequia she went walkabout, never to be seen by us again.
She has a name, it is minimus.
We take the blame for the loss. Though Chris did carefully tie the unusually large painter that by heft alone would confuse the mistaken owner of another boat who might untie by accident ("hey, big enough painter you got there?" was almost always remarked to us at dinghy docks) and checked the knot, we did not lock minimus. Our mistake.
We did not lock it because we were foolish enough to think she was such an unusual boat that no one would choose her among the many inflatables that look the same, are easily stowed, and would resell anonymously. We thought no one would would want such a beat up looking old skiff scarred from ten years in service to a demanding crew, adults and children alike, as well as various dogs and a cat. The outboard was painted pink to match the coving stripe on Hogfish maximus. Of course it was a Yamaha 15, a much sought after outboard for resale value and because it is a damn good engine (started every time, as long as there was gas in the tank...)We had heard many stories of its popularity with the tief trade, and of course engine cowlings can be replaced easily, but we thought... And we trusted the goodness of our fellows on the water. And we wanted to get ashore to join in the fun that we were having that was supplied by the regatta committee. and we did not lock her. Really, really. Foolishly naive? Even after a rediculously long time spent livivng on the water? Oh, yes.
Like I said it is our fault.
So we were able to purchase a new rowing dinghy and have learned it is best to lock up the dinghy and to warn others to lock up theirs. We now notice, with regret for the necessity, all the other locks on the other dinghies at dinghy docks.
But that does not make it any better or make it right that during regattas dinghies go missing at an alarming rate. Nor is it okay that during regattas there is the practice of "borrowing" any dinghy to get back to a boat and then not returning said dinghy but "setting it free" because such an act is theft. Borrowing denotes the act of returning. Nor is it okay that the local police find the practice of dinghy theft so commonplace that it is a bore of a chore to record it and the reply to action is the advice to "Check the anchorage because there are a lot of French boats out there..."
Stating the obvious, it is not okay to steal and resell. Really, really.
We dont know how the dinghy left the dock. We do know there were two other dinghies that did not leave docks with their owners that night; one found two days later back under the dock where we left our dinghy with very large tattered flip flops and a machete on board with little pilchards swimming in it (bait? or did the pilchards really wear such big flip flops when the fairy godmother returned to take them to the ball? and the machete?... I doubt the French keep machetes in their inflatables) We do know that there were two young men startled by a couple who returned to the dock to find the men in their dinghy with a piece of line wrapped around the quick stop button trying to start the couples dinghy minus its red safety cord which was in the couples possession since it was their dinghy. The response by the startled young men was oops wrong dinghy. Yeah, you bet.
We did make a call on the VHF to report the loss and got a response from another yacht who lost their dinghy that night and also a saint on St. Vincent who reported the loss to the St. Vincent Coast Guard. I was so shaken that I originally reported minimus as being green. It is grey. It was green, its original gellcoat colour, many years ago. The Bequia Regatta Committee were very sympathetic and wanted to give us microphone time to explain our loss but who wants to be a bummer on the happy occasion at the final prize giving? Thank you, we did enjoy the Bequia regatta very much and would love to return. Some of my favourite people on Bequia are the Ratsas at the market. One suggested that someone else wanted the dinghy more than us. Maybe so, but I dont like that philosophy so much.
Now minimus could be anywhere, Easter being months ago. And she could be green again or white or blue, or all of the above. or she could still be floating on the currents, because she is core she will be floating, even full of rainwater. She was our life raft.
We fantasize that minimus is being enjoyed by a family who found her floating off some quiet island in Panama maybe and there are many fish being placed into her again and the family is being taken safely home in any weather as she made the passage for us many times over.

BUT, if you do see this dinghy let us know. There is a reward. Maybe she will be our dinghy once again.

And if nothing else, lock your dinghy. Give someone reason to not let your dinghy be taken from you.

stay safe,
Rachel


Read More..

Design 2731 Manhattan Sailing Club Dinghy Dock

Friday, February 19, 2016


If you recall, back in 2001-2002 we designed the floating clubhouse for the Manhattan Sailing Club, the Honorable William Wall, design #2686. Thats her way out in the distance next to Ellis Island in the image below.


The dinghy dock was to be moored in the shallow flats behind and southwest of the Statue of Liberty. The barge was designed to accommodate 7 Lasers, 6 Sunfishes and 12 Optimists for the schools dinghy program. The boats would be stored on carpeted ramps. The floating facilitys design also included toilet rooms and an observation deck. In the end the school purchased an existing barge due to cost constraints.

You can learn more about the floating clubhouse and the dinghy sailing program by visiting Manhattan Sailing Clubs website by clicking here. Simply follow the links to "Clubhouse" and "Junior Sailing."


Principal Dimensions
LOA 90-0"
Beam 30-0"
Draft 2-0" (light ship)
Read More..

Design 1880 Glasspar 17 Dinghy

Tuesday, February 9, 2016



In 1966 we were commissioned to design 3 sizes of fiberglass dinghies for the Glasspar boatbuilding company of Costa Mesa, California. Here is the second with a length overall of 17.

Here is the general arrangement plan.


None of the 3 models ever went into production.  As I stated in our previous posting, please note the draftsman for these plans was the very talented Germán Frers, Jr.

Principal Dimensions
LOA 17-0"
LWL 15-3"
Beam 6-6"
Draft 0-8" (board up) 4-7" (board down)
Sail Area 159 sq ft
Read More..

New Dinghy Launches in Russia

Friday, February 5, 2016

Similar to my previous post, a new boat has also been launched in the Eastern Europe (actually two new launches). That is where the similarity ends.

This one is a thoroughly modern high-performance dinghy, rather than the small classic cruising Cape Henry 21. It is Paper Jet #65 and was launched in Moscow, Russia. Built by Konstantin Denison and Den Vakar, she is striking in her red and white colour scheme.
Ready for launch. Looks fast even when standing still.
Raising sail for the first time, with a 420 rig for training.
Paper Jet looks interesting upright or capsized.
They are using a 420 rig as a training rig for the first season before moving up to a permanent Paper Jet rig. These boats are a lot of fun to sail and can challenge the sailors to push their limits.

The other launching is an Argie 15, also in Moscow, Russia. She was built by Andrey Borodihin, who built her as a family fun boat. He reports that they have enjoyed sailing their boat, with fun and exciting sailing.
Andreys Argie 15 in a quiet moment.
Argie 15 being chased by a smiley balloon.
Not only for calm weather, here the Argie shows her strong wind ability.
Andrey is very happy with his Argie 15 and her performance.

To read more about these designs and others, go to our main website at http://dixdesign.com/.
Read More..

My dinghy cruising packing list

Tuesday, February 2, 2016

Ive been doing quite a bit of dinghy cruising this year. So much so that I havent had much time to write about it, sorry.

Ive gotten my packing routine down to the point where I feel its getting quite efficient.  I always bring the same items and store them in the same place for every trip.  A little organization goes a long way when it comes time to find something.  I try to bring only what I need, and use items for multiple purposes whenever possible.  I only bring extras of items that are crucial.

It really bugs me to have things out where I have to walk on or around them, so I store everything in the lockers and under the thwarts and side decks. Once everything is packed away, it looks like Im not bringing anything at all.  Thats not easy to do in an open boat.

Here is the packing list that I use.  This first page shows where on the boat I store everything.   Many of the items are stored in bags.  I use soft-sided cooler bags for food and water, duffel bags and backpacks for clothing, and dry bags for electronics. Page 2 shows the contents of each bag.

Most of this stuff stays on the boat permanently.  Usually all I have to pack for a trip is food and clothes.



Read More..

Design 323 Hydrolite Dinghy

Saturday, January 30, 2016


Details are sketchy at best for this design. Heres what we think we know. George Barnes of the Skaneatales Boatworks of Skaneateles, New York, invented a glue for cold molded boat construction. We were hired to design the dinghy you see here, named the Hydrolite. Eight Hydrolites were built using an autoclave. The boats were built of mahogany. The year was 1940.

The glue that he invented was later sold to the US Navy to build PT Boats.


Here are the plans we pulled off our microfiche files. Note the gear associated with the rig, centerboard and tiller was completely omitted in the images you see here.


I include the lines as they are interesting. Comparing them to the images however, the beautiful curvature at the transom was eliminated.


Principal Dimensions
LOA 8-0"
LWL 7-9"
Beam 3-11"
Draft 0-5"

Read More..